300-625 Exam Questions - Real & Updated Questions PDF
Pass Guaranteed Quiz 2022 Realistic Verified Free Cisco
2. Implementation
Weightage – 35%
The second domain is an extensive one. It is focused on topics like the implementation of Fibre Channel port channels, Fibre Channel protocol services, Name service, and Cisco Fabric Services. It also checks the ability to implement FCoE, including FCoE Initialization Protocol. Besides, it also throws light on concepts like Priority flow control, Enhanced transmission selection, Data Center Bridging Exchange/Link Level Discovery Protocol. The configuration and implementation of VSAN extensions, and NPV and NPIV are involved in this module too.
3. Management and Monitoring
Weightage – 25%
In this domain, the test-takers have to demonstrate their competency in concepts like setting up the DCNM device manager, DCNM-SAN client, and licensing options. Other topics include slow-drain analysis, RBAC configuration, and SAN telemetry streaming implementation.
NEW QUESTION 17
Which configuration is needed to enable manual ESP mode for Fibre Channel TrustSec on Cisco MDS switches?
- A. MDS(config)# interface fc 1/1
MDS(config-if)# fcsp mode gcm
MDS(config-if-fcsp)# fcsp esp manual - B. MDS(config)# interface fc 1/1
MDS(config-if)# fcsp esp manual
MDS(config-if-fcsp)# mode gcm - C. MDS(config)# fcsp esp manual
- D. MDS(config)# interface fc 1/1
MDS(config-if)# fcsp esp manual
Answer: D
NEW QUESTION 18
Refer to the exhibit. Which configuration change improves the ability of the link to recover from frame loss?
- A. Increase the reset timeout.
- B. Disable PMTU discovery.
- C. Increase the send buffer size to 15000 KB.
- D. Enable selective acknowledgment.
Answer: D
NEW QUESTION 19
Which port mode is used on an NPV device to connect to an NPIV core switch?
- A. N
- B. NP
- C. E
- D. F
Answer: B
NEW QUESTION 20
Two stable fabrics have overlapping domains. After a switch from the first domain is joined to a switch from the second domain, both switches become isolated. What caused the problem?
- A. The rcf-reject option in enabled on the interfaces.
- B. The rcf-reject option in disabled on the interfaces.
- C. The autoreconfigure option is disabled on both switches.
- D. The autoreconfigure option is enabled on both switches.
Answer: D
NEW QUESTION 21
Refer to the exhibit. Which command is used to determine which switch has the lock?
- A. show flogi database
- B. show zone status
- C. show zoneset active
- D. show fcs ie vsan
Answer: B
NEW QUESTION 22
Drag and drop the DCNM configuration tasks from the left onto the correct tools on the right.
Answer:
Explanation:
NEW QUESTION 23
Which two steps are mutual between Cisco secure boot and UEFI secure boot? (Choose two.)
- A. operating system
- B. hardware anchor
- C. kemel
- D. microloader
- E. bootloader
Answer: A,E
Explanation:
Section: Deployment
NEW QUESTION 24
A storage administrator is connecting two previously configured switches to make a single fabric. When the E Ports are connected, the administrator sees a ZONE MERGE FAILURE message referring to the zoneset for VSAN 10 on each switch. Which command should the administrator use to allow these switches to work together?
- A. zoneset import interface fc1/1 vsan 10
- B. zoneset copy active-zoneset full-zoneset
- C. zoneset distribute full vsan 10
- D. zoneset overwrite-control vsan 10
Answer: A
Explanation:
Section: MDS Troubleshooting
NEW QUESTION 25
Which condition requires using a device alias rather than a Fibre Channel alias?
- A. The zone database must be distributed over the fabric.
- B. All aliases being used are being configured in the same VSAN.
- C. Aliases must be saved within a central database on the fabric.
- D. The same alias must be used in zoning as well as DPVM.
Answer: A
NEW QUESTION 26
A domain ID conflict is detected on a switch. Which action resolves the issue in the shortest possible time after the preferred domain ID is changed to a static domain ID?
- A. Enter the commands to complete a domain manager fast restart
- B. Issue an fcdomain disruptive restart
- C. Issue an fcdomain nondisruptive restart.
- D. Enter the commands for a VSAN suspend / no-suspend
Answer: B
NEW QUESTION 27
Refer to the exhibit.
Which command is used to determine which switch has the lock?
- A. show flogi database
- B. show zone status
- C. show zoneset active
- D. show fcs ie vsan
Answer: B
NEW QUESTION 28
A Cisco MDS Series Switch with the POAP feature boots and does not find the startup configuration. Which location is checked first when the switch enters POAP mode?
- A. TFTP server where the necessary configuration files are downloaded
- B. DHCP server to bootstrap the interface IP address, gateway, DNS server, and TFTP IP addresses
- C. HTTP server where the URL is used to download the software image
- D. USB device that contains the software image files and the switch configuration file
Answer: D
NEW QUESTION 29
Which component is initially responsible for loading the kickstart image on Cisco MDS Switches?
- A. NX-OS
- B. BASH
- C. BIOS
- D. ROMMON
Answer: A
NEW QUESTION 30
What is the function of the 0xFFFFFC address in a Fibre Channel fabric?
- A. time server
- B. fabric controller
- C. name server
- D. management server
Answer: C
Explanation:
Section: Implementation
Explanation
NEW QUESTION 31
Which port mode is used on an NPV device to connect to an NPIV core switch?
- A. N
- B. NP
- C. E
- D. F
Answer: B
Explanation:
Section: Implementation
NEW QUESTION 32
Which configuration is available only in Cisco DCNM-SAN Advanced mode?
- A. template-based provisioning
- B. VMpath configuration
- C. IVR
- D. zoning
Answer: C
NEW QUESTION 33
Refer to the exhibit.
Device alias information must be merged for two fabrics. Which setting must match on both fabrics before the merge can be performed successfully?
- A. qos
- B. device-alias mode
- C. session
- D. smart-zoning
Answer: B
NEW QUESTION 34
Which EtherType is used by the FCoE Initialization Protocol?
- A. 0*8913
- B. 0*8906
- C. 0*xfc0e
- D. 0*8914
Answer: D
NEW QUESTION 35
Drag and drop the items from the left onto the correct descriptions on the right. Not all items are used.
Answer:
Explanation:
NEW QUESTION 36
......
Get to the Top with 300-625 Practice Exam Questions: https://www.exam4pdf.com/300-625-dumps-torrent.html
Free CCNP Data Center 300-625 Ultimate Study Guide: https://drive.google.com/open?id=1ai-tEJwz9zj2RqCNOiVeEX31jZEo9A_i
