Cisco 010-151 Deluxe Study Guide with Online Test Engine
010-151 dumps review - Professional Quiz Study Materials
NEW QUESTION # 77
Which supervisor module is supported by a Cisco Nexus 7700 Series Switch?
- A. second-generation supervisor module (Sup2)
- B. third-generation supervisor enhanced module (Sup3E)
- C. first-generation supervisor module
- D. second-generation supervisor enhanced module (Sup2E)
Answer: D
NEW QUESTION # 78
Refer to the exhibit.
What item does 6 represent?
- A. RAID supercap connector
- B. RTC battery CR2032 socket
- C. Mezzanine-style connector for optional I/O expander module
- D. Trusted platform module (TPM) socket
Answer: C
NEW QUESTION # 79
Which two statements are true about the Cisco UCS C4200 Rack server and UCS C125 M5 compute node?
(Choose two.)
- A. AMD EPYC 7000 series processors, with up to 32 cores per socket
- B. 8 NVIDIA SXM2 V100 32G modules with NVLink interconnect
- C. Over 45 TB of storage, with up to six small-form-factor 2.5-inch direct-attached drives per node
- D. 2666-MHz DDR4 memory and 24 DIMM slots for up to 3 TB of total memory
- E. Optional dual USB ports for increased storage or boot drive capacity
Answer: C,E
NEW QUESTION # 80
Refer to the exhibit.
Refer to the exhibit. What is the name and function of the icon labeled C?
- A. Pin icon to prevent the Navigation pane from sliding
- B. Favorite Icon to make any specific work pane in the application a favorite
- C. Index Icon to view listings in alphabetical order
- D. Menu Icon to view the Navigation pane
Answer: D
NEW QUESTION # 81
Which two firmware components does the Host Upgrade Utility upgrade? (Choose two.)
- A. Cisco UCS Manager
- B. Cisco UCS Infrastructure software
- C. Fabric Interconnect firmware
- D. System BIOS
- E. CIMC
Answer: D,E
NEW QUESTION # 82
Which two major components does a Cisco Nexus 1000V Series Switch have? (Choose two.)
- A. Virtual Network Module
- B. Virtual Ethernet Module
- C. Virtual Fiber Channel Module
- D. Virtual Memory Controller Module
- E. Virtual Supervisor Module
Answer: B,E
NEW QUESTION # 83
Which cable is used to access the command-line interface of a Cisco UCS 6120XP Fabric Interconnects?
- A. SFP+ Ethernet transceiver cable
- B. KVM cable
- C. Ethernet cable
- D. console cable
Answer: D
NEW QUESTION # 84
On the Sensors page from the CIMC view, which four tabs are displayed to view further information? (Choose four.)
- A. Fan
- B. CPU
- C. LEDs
- D. Power Supply
- E. Memory
- F. Temperature
Answer: A,C,D,F
NEW QUESTION # 85
Which two statements about PCIe are true? (Choose two.)
- A. A link that is composed of four lanes is called an x4 link.
- B. The PCIe standard is a bus-based system in which all the devices share the same bidirectional, 32-bit or
64-bit, parallel signal path. - C. The PCle supports native hot-swap functionality.
- D. The PCIe 4.0 standard doubles the transfer rate compared to PCIe 5.0.
- E. You can install a PCI Express x16 adapter into an x4 slot.
Answer: A,D
NEW QUESTION # 86
Which cable is used to access the command-line interface of a Cisco UCS 6120XP Fabric Interconnects?
- A. SFP+ Ethernet transceiver cable
- B. KVM cable
- C. Ethernet cable
- D. console cable
Answer: D
Explanation:
Explanation/Reference:
corrected.
NEW QUESTION # 87
Which two commands allow you to view the state of high availability between the two clustered Fabric Interconnects? (Choose two.)
- A. show cluster HA status
- B. show cluster extended-state
- C. show cluster state
- D. show cluster HA state
- E. show cluster state extended
Answer: B,C
NEW QUESTION # 88
Refer to the exhibit.
Which statement correctly identifies the front panel LEDs on the Cisco UCS C220 Server?
- A. A is network link activity LED; B is system status LED; C is identification button and LED; D is power button and power status LE
- B. A is system status LED; B is network link activity LED; C is power button and power status LED; D is identification button and LED.
- C. A is power button and power status LED; B is identification button and LED; C is system status LED; D is network link activity LED.
- D. A is network link activity LED; B is system status LED; C is power button and power status LED; D is identification button and LED.
Answer: C
NEW QUESTION # 89
What is the correct path to verify the Overall Status of Chassis 1 | Server 3?
- A. Servers Tab > Chassis > Server 3 General tab
- B. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 General tab
- C. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 FSM tab
- D. Admin Tab > Chassis > Chassis 1 > Servers > Server 3 General tab
- E. Status Tab > Chassis > Chassis 1 > Servers > Server 3
- F. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 Status tab
Answer: B
NEW QUESTION # 90 
Refer to the exhibit. Which item does C represent?
- A. CMOS Battery
- B. GPU
- C. Internal USB
- D. Mini Storage Connector
- E. mLOM Connector
Answer: D
Explanation:
Explanation/Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-b-series- blade-servers/b200m5-specsheet.pdf
NEW QUESTION # 91
Refer to the exhibit.
Which item does A represent?
- A. Virtual Interface Card for Cisco UCS B420 M3 Blade Servers
- B. Virtual Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers
- C. SuperCap module for Cisco UCS B420 M3 Blade Servers
- D. Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers
- E. mLOM for Cisco UCS B420 M3 Blade Servers
Answer: E
NEW QUESTION # 92
Which NX-OS command is used to display the boot variable configuration?
- A. show boot
- B. open boot
- C. show config
- D. display boot
Answer: A
NEW QUESTION # 93
When replacing a standalone C-Series server which order will be used to shut down the server via CIMC?
- A. Click Host power, Click Shut down
- B. Click Power off, Click Shut down
- C. Click Host power, Click Shut off
- D. Click Power off, Click Shut off
Answer: B
NEW QUESTION # 94
Which transceiver can support 400 Gigabit Ethernet?
- A. QSFP+
- B. QSFP28
- C. QSFP-DD
- D. SFP-DD
Answer: C
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/transceiver-modules/ datasheet-c78-743172.html
NEW QUESTION # 95
What is the command to provide details pertaining to the state of the cluster?
- A. Show cluster state
- B. Show cluster
- C. Show cluster extended-state
- D. Show extended cluster state
Answer: A
Explanation:
In a Cisco UCS (Unified Computing System) environment, the show cluster state command is used to display detailed information about the state of the cluster, particularly the high availability (HA) state between the two Fabric Interconnects. This command provides essential details regarding the roles of each Fabric Interconnect (primary or subordinate) and the overall health of the cluster.
Explanation of Incorrect Options:
A . Show cluster: This command is incomplete and does not provide the full state information of the cluster.
B . Show cluster extended-state: Although this command is used to display additional details about the cluster, it is not specifically the command that provides the basic state information.
D . Show extended cluster state: This is not a valid command in Cisco UCS CLI.
Summary:
The correct command to check the basic state of the cluster in a Cisco UCS environment is show cluster state. This command is critical for monitoring the high availability configuration and ensuring the UCS Fabric Interconnects are operating as intended.
NEW QUESTION # 96
Refer to the exhibit.
Which call-out accurately shows the current running version of the Cisco UCS Manager management software?
- A. C - Interface Card 1 running version 1.4(1m)
- B. D - Kernel running version 4.2(1)N(1.4m)
- C. B - IO Module 1 running version 1.4(1m)
- D. A - UCS Manager running version 1.4(1m)
Answer: D
NEW QUESTION # 97
Refer to the exhibit.
Which option should you select to get the output of the show tech-support detail command for the Cisco UCS B-Series blade?
- A. D - rack-server
- B. C - fabric-extender
- C. B - chassis
- D. A - ucsm
Answer: C
NEW QUESTION # 98
Which type of optics module is supported by a Cisco Nexus 7700 F4-Series 30-Port 100-Gigabit Ethernet Module?
- A. QSFP28
- B. Cisco CPAK
- C. SFP+
- D. QSFP+
Answer: D
NEW QUESTION # 99
......
Exam Questions Answers Braindumps 010-151 Exam Dumps PDF Questions: https://www.exam4pdf.com/010-151-dumps-torrent.html
010-151 Test Prep Training Practice Exam Questions Practice Tests: https://drive.google.com/open?id=1uWLv56OUrMiD4wY-uh65s3fmy20n9Q6X
