E-S4HCON2022 Exam Dumps - PDF Questions and Testing Engine
E-S4HCON2022 Dumps - The Sure Way To Pass Exam
Passing the SAP E_S4HCON2022 exam can help IT professionals to demonstrate their expertise and skills to potential employers or clients, paving the way for better job opportunities and higher pay. Furthermore, E_S4HCON2022 certification verifies the individuals' practical knowledge and experience required to plan, implement and verify the system upgrade and conversion projects from an SAP ERP platform to SAP S/4HANA.
NEW QUESTION # 27
Which Guides contain information about SUM phases starting with "EU_CLONE_"?
There are 2 correct answers to this question.
Response:
- A. The major SUM Guide
- B. The DMO Guide
- C. The SAP S/HANA Conversion Guide
- D. The Application Guide
Answer: B,C
NEW QUESTION # 28
What do you need to consider when performing the SI checks for an SAP S'4I 1ANA conversion? Note There are 2 correct answers to this question.
- A. You need to build up an SI check framework by applying SAP Notes
- B. You need an SAP system based on AS ABAP 7.50 or above for the SI check framework
- C. The errors from the SI checks must be solved, otherwise. SUM will report an error
- D. The SI checks are executed in the development system and the results are transported into the subsequent systems
Answer: A,B
NEW QUESTION # 29
You are executing a standard SUM procedure to update an SAP system using main configuration mode "Standard". When will the shadow system be stopped for the last time?
Please choose the correct answer.
Response:
- A. Before the downtime starts
- B. Early in the downtime
- C. As part of the cleanup process
- D. At the end of the downtime
Answer: A
NEW QUESTION # 30
During an SAP S/4HANA conversion with DMO, which of the following actions take place during the business downtime of the SUM procedure?
There are 3 correct answers to this question.
Response:
- A. Execution of eCATTs for business validation tests
- B. Execution of SPDD modification adjustment
- C. Execution of XPRAs and AIMs
- D. Creation of the table structures in the new SAP HANA database
- E. Execution of SPAU modification adjustment
Answer: A,C,E
NEW QUESTION # 31
You are running an SAP ECC system.
For which of the following activities does SUM allow you to use the near-Zero Downtime Maintenance (nZDM) capabilities?
Note There are 3 correct answers to this question
- A. Perform an SAP S/4 HANA conversion including DMO
- B. Use DMO for SUM
- C. Perform an SAP S/4 HANA conversion without DMO
- D. Apply SAP support packages
- E. Upgrade the SAP system
Answer: B,D,E
NEW QUESTION # 32
You are performing an upgrade with SUM using DMO to an AS ABAP 7.50 based SAP system. You entered a specific number of R3Ioad processes during Roadmap step "Extraction".
Where can you change this during the migration via the Utilities option of the SUM UI?
There are 2 correct answers to this question
Response:
- A. In DMO Migration Preparation
- B. In SUM Phaselist
- C. In SUM Parameters
- D. In Process Control Center
Answer: C,D
NEW QUESTION # 33
You are performing an upgrade with SUM. You are in the BIND_PATCH phase of the roadmap step "Configuration". For some software components you find entries in the "Calculated level" column.
What does the "Calculated level" indicate for those software components?
Please choose the correct answer.
Response:
- A. The SAP Support Packages found in the download directory
- B. The SAP Support packages of the Support Package Stack, calculated by the Maintenance Planner
- C. The SAP Support Packages contained in the upgrade media
- D. The SAP Support Packages that will be bound to the upgrade
Answer: A
NEW QUESTION # 34
You are performing an SAP S/4HANA conversion of the development system. Which credentials do you use in which system to perform the adjustment of programs and other non-dictionary repository objects (SPAU)?
Please choose the correct answer.
- A. Credentials of user DDIC in the development client of the development system
- B. Credentials of a named user in the development client of the development system
- C. Credentials of user DDIC in client 000 of the shadow system
- D. Credentials of a named user in client 000 of the shadow system
Answer: B
NEW QUESTION # 35
Which preparational steps must be performed for an SAP S/4HANA conversion?
There are 2 correct answers to this question.
Response:
- A. Delete client 066 (Early Watch Client)
- B. Install add-on SAP Gateway 7.50
- C. Uninstall Fiori apps not released for SAP_UI 7.50
- D. Uninstall industry extensions not supported by SAP S/4HANA
Answer: A,C
NEW QUESTION # 36
You downloaded content from the SAP note 1000009 ("ASU Toolbox 2008"). Which transaction needs to be executed to use that content in the ASU Toolbox?
Please choose the correct answer.
Response:
- A. /ASU/SSM (ASU Simple Schedule Manager)
- B. /ASU/START (Start ASU Toolbox)
- C. /ASU/UPGRADE (Start ASU Toolbox in Upgrade Mode)
- D. /ASU/SHOW_NOTE (Show SAP Note via Web-Browser)
Answer: B
NEW QUESTION # 37
In ICNV. How database operations synchronized between the source and the target table?
- A. AA
- B. Deletes are directly executed in the target table by delete trigger.
Answer: B
NEW QUESTION # 38
During a SUM run you want to check if the phase SHADOW_IMPORT_INC is still running properly. Where can you find information about this?
There are 2 correct answers to this question.
Response:
- A. Check for the latest log files in the SUM directory, subdirectory ABAP, subdirectory tmp
- B. Check for running R31oad processes on the host of the primary application server
- C. Check for running batch jobs in the shadow system via Job Overview (SM37)
- D. Check for running R3trans processes on the host of the primary application server
Answer: A,D
NEW QUESTION # 39
SUM was registered at the SAP Host Agent. Based on which information does the SAP Host Agent determine the path to the SUM directory.
- A. The path was stored to the environment of user <sid>adm during registration
- B. The path was stored in file sumabap conf during registration
- C. The path is taken from the URL entered in the browser to start SUM
- D. The path was stored in file host_profile during registration
Answer: B
NEW QUESTION # 40
What can you achieve by setting the SUM parameter "migration_only" to 1 in parameter file SAPup_add.par?
Please choose the correct answer.
Response:
- A. An upgrade of the software components is performed, without changing the database type.
- B. A migration of the SAP system to a new hardware is performed, without performing an SAP S/4HANA conversion.
- C. An SAP S/4HANA conversion is performed, without adapting the customer data.
- D. A change of the database type is performed, without changing the software components.
Answer: D
NEW QUESTION # 41
Which of the following SUM activities require a stack XML file calculated by the maintenance planner? Note: There are 3 correct answers to this question.
- A. Prerequisite check
- B. SAP S/4HANA conversion without DMO
- C. DMO without system update
- D. SAP S/4HANA conversion including DMO
- E. Benchmark tool
Answer: A,B,D
NEW QUESTION # 42
During the upgrade of your development system, you run into the adjustment of non-dictionary objects handled by transaction SPAU There you find programs that are shown in status "automatic adjustment (green traffic tight). What will happen with these programs when you continue with your upgrade without performing any other actions inside your SAP system?
- A. SUM refuses to continue unless you have marked a transport request as modification adjustment transport
- B. SUM continues with the next phase and your modifications are lost
- C. Before continuing with the next phase SUM asks for a modification adjustment transport
- D. SUM continues with the next phase and your modifications are kept as In the start release
Answer: D
NEW QUESTION # 43
You are performing an S/4HANA conversion of the development system. Which credentials do you use in which system to perform the adjustment of dictionary objects (SPDD)?
Please choose the correct answer.
Response:
- A. Credentials of user DDIC in the development client of the development system
- B. Credentials of user DDIC in client 000 of the shadow system
- C. Credentials of a named user in the development client of the development system
- D. Credentials of a named user in client 000 of the shadow system
Answer: D
NEW QUESTION # 44
You have chosen the "Advanced" option during the main configuration of the SUM tool. Which steps take place via the shadow instance?
There are 2 correct answers to this question.
Response:
- A. Switch to new repository (EU_SWITCH)
- B. Activation of dictionary objects (ACT_UPG)
- C. Modification adjustment (SPDD)
- D. Conversion of application tables (PARCONVJJPG)
Answer: B,C
NEW QUESTION # 45
In which case can you use near-Zero Downtime Maintenance (nZDM)? Note: There are 2 correct answers to this question.
- A. When performing an SAP S/4HANA conversion with DMO
- B. When upgrading an SAP ECC system with DMO
- C. When performing an SAP S/4HANA conversion without u DMO
- D. When upgrading an SAP S/4HANA Server system
Answer: B,D
NEW QUESTION # 46
What are the benefits of using the Benchmarking option of the DMO for SUM?
There are 2 correct answers to this question.
Response:
- A. You can record the modification adjustment during migration and use the transports in the next runs.
- B. You can verify that the content of the download directory matches the stack.XML file.
- C. You can find the optimal number of parallel R31oad processes by monitoring host performance.
- D. You can obtain migration duration files that can be used to optimize the next runs from a previous benchmark run.
Answer: A,C
NEW QUESTION # 47
You are using DMO of SUM. You defined 40 parallel R3load processes during uptime and 80 parallel R3load processes during downtime.
The server provides 8 CPU cores. Phase EU_CLONE_MIG_DT_RUN is running. In the Charts Control Center you can see 40 Process Buckets being executed in parallel.
Why are 40 Process Buckets executed in parallel?
Please choose the correct answer.
Response:
- A. SUM is still running in uptime; the number of 40 defined R31oad processes is considered.
- B. The number of CPU cores does not allow more than 40 R31oad processes to be run in parallel.
- C. These are 40 pairs of R3load processes, so there are 80 R3load processes running.
- D. There is a maximum of 40 parallel R31oad processes within this specific downtime phase.
Answer: C
NEW QUESTION # 48
You are performing an SAP S/4HANA conversion. You are in the BIND_PATCH phase of the Configuration roadmap step. For some software components, you find entries in the Calculated level column. What does the Calculated level indicate for those software components?
- A. The SAP support packages of the support package stack, calculated by the maintenance planner
- B. The SAP support packages in the download directory that are newer than the selected support package stack
- C. The SAP support packages that will be bound to the conversion
- D. The SAP support packages contained in the upgrade media, calculated by the maintenance planner
Answer: B
NEW QUESTION # 49
The SUM procedure stops with an error during uptime. How can you identify the current phase, the one in which SUM encountered an error?
There are 2 correct answers to this question.
Response:
- A. Check the messages shown by the SUM UI
- B. Check the most recent entries in SAPup.log
- C. Check the system log (transaction SM21) of the SAP system
- D. Check the most recent entries shown in file sapevt.trc
Answer: A,B
NEW QUESTION # 50
What SAP systems can you use for the ABAP Test Cockpit (ATC) to perform the custom code analysis for an SAP S/4HANA conversion? Note: There are 2 correct answers to this question.
- A. SAP Solution Manager 7.2
- B. SAP ECC system from SAP ERP 6.0 EHP 8
- C. SAP S/4HANA Server 1809 and above
- D. Standalone AS ABAP with SAP_BASIS 752 and above
Answer: C,D
NEW QUESTION # 51
You are performing an inplace SAP S/4HANA conversion including DMO. What is the latest point in time when you can reset the procedure without losing data?
- A. The end of the business downtime
- B. The end of the database migration
- C. The start of the business downtime
- D. The start of the Execution roadmap step
Answer: A
NEW QUESTION # 52
......
Pass SAP E-S4HCON2022 Exam Quickly With Exam4PDF: https://www.exam4pdf.com/E-S4HCON2022-dumps-torrent.html
E-S4HCON2022 Exam Questions (Updated 2023) 100% Real Question Answers: https://drive.google.com/open?id=187kEJbMVQXyORva7FijdFAOZOE9r2Plp
