Get Instant Access of 100% Real SAP C-S43-2022 Exam Questions with Verified Answers
Exam Dumps for the Preparation of Latest C-S43-2022 Exam Questions
NEW QUESTION # 41
Where can you see the results of the material availability check for maintenance orders? Note: There are 2 correct answers to this question
- A. Within a maintenance order
- B. In the report Material: Where-Used List
- C. In the list editing (single-level) for maintenance orders
- D. In the material reservation list in inventory management
Answer: A,B
NEW QUESTION # 42
A Task List contains two operations:
*Every 3 MON: pump inspection
*Every 24 MON. pump replacement
When replacing the pump, the operation pump inspection will be ignored. How can you achieve this?
- A. Assign different hierarchy levels
- B. Create a task list hierarchy
- C. Create a cycle set sequence
- D. Set the lead float
Answer: C
Explanation:
Explanation
A cycle set sequence is a feature that allows you to combine several multiple counter plan cycles in a set and determine the order in which the system considers the cycle sets for scheduling. A multiple counter plan is a maintenance plan that is based on one or more performance-based or time-based cycles1.
In this case, you can create a cycle set sequence with two cycles:
Cycle 1: Every 3 MON: pump inspection
Cycle 2: Every 24 MON: pump replacement
You can assign a different maintenance item and task list to each cycle, and specify the repetition factor for each cycle. The repetition factor determines how many times the cycle is repeated before the next cycle in the sequence is considered. For example, if you set the repetition factor of cycle 1 to 8, the system will schedule the pump inspection 8 times before scheduling the pump replacement.
By creating a cycle set sequence, you can achieve the requirement that when replacing the pump, the operation pump inspection will be ignored. The system will only generate a call object for the maintenance item that is assigned to the current cycle set. Therefore, when the pump replacement is due, the system will not generate a call object for the pump inspection.
The other options are incorrect because:
Assign different hierarchy levels: Hierarchy levels are used to structure the task list operations into groups and subgroups. They do not affect the scheduling of the task list operations.
Set the lead float: Lead float is a time buffer that is added to the start or finish date of a task list operation. It does not affect the scheduling of the task list operations.
Create a task list hierarchy: A task list hierarchy is a structure that contains several task lists that are linked together by a superior task list. It does not affect the scheduling of the task list operations.
References: 1: Cycle Set Sequence in Multiple Counter Plan - SAP Help Portal
NEW QUESTION # 43
In which maintenance object can you use an activity type? Note: There are 2 correct answers to this question.
- A. Notification activity
- B. Work center
- C. Maintenance order operation
- D. Maintenance order header
Answer: B,C
NEW QUESTION # 44
What can be determined using the offset within a maintenance strategy? Note: There are 2 correct answers to this question.
- A. A preliminary buffer shifting the reference date of the maintenance order
- B. The first due date of a maintenance package
- C. The call date for the maintenance order
- D. A one-time shift of a maintenance package
Answer: B
NEW QUESTION # 45
You settle a refurbishment order with the batches (valuation types) having price control standard price. What is the effect? Note. There are 2 correct answers to this question.
- A. The goods receipt for the batch refurbished is posted with the value of the moving average price
- B. The effective costs are posted to the respective batch (valuation type).
- C. The effective costs are posted as a credit memo to a price difference account
- D. The goods receipt for the batch refurbished is posted with the value of the standard price.
Answer: C,D
Explanation:
Explanation
When you settle a refurbishment order with the batches (valuation types) having price control standard price, the following effects occur:
The effective costs are posted as a credit memo to a price difference account. This means that the difference between the actual costs of the refurbishment and the standard price of the batch is recorded as a variance in the accounting document. This ensures that the inventory value of the batch is not affected by the refurbishment costs1 The goods receipt for the batch refurbished is posted with the value of the standard price. This means that the inventory value of the batch is updated with the predefined price that is maintained in the material master. This ensures that the inventory value of the batch is consistent and stable1 The other options are incorrect because:
The effective costs are not posted to the respective batch (valuation type). The batch valuation is based on the standard price, not the actual costs of the refurbishment1 The goods receipt for the batch refurbished is not posted with the value of the moving average price. The moving average price is only used for batches with price control moving average price, not standard price1 References: 1: Settlement Receiver | SAP Help Portal
NEW QUESTION # 46
You require stock material to carry out maintenance tasks. What do you have to consider regarding material planning in the maintenance order? Note: There are 2 correct answers to this question?
- A. A goods issue can be entered for planned and unplanned material
- B. Material can be assigned at the order header level.
- C. For stock material you always need a reservation
- D. The pick list for materials can be printed before order release.
Answer: A,C
Explanation:
Explanation
Material planning in the maintenance order is the process of determining the type, quantity, and availability of the materials required for carrying out the maintenance tasks. There are some considerations regarding material planning in the maintenance order, such as:
Material can be assigned at the operation level or the sub-operation level, but not at the order header level. This is because the material requirement is linked to the specific work that needs to be done in the order. Therefore, option A is incorrect1.
For stock material, you always need a reservation to ensure that the material is available when needed.
A reservation is a request to the warehouse to keep a certain amount of material ready for withdrawal at a certain time. Therefore, option B is correct1.
A goods issue is the physical withdrawal of material from the warehouse. It can be entered for both planned and unplanned material in the maintenance order. Planned material is the material that is specified in the order before the actual execution of the work. Unplanned material is the material that is added to the order during or after the execution of the work. Therefore, option C is correct2.
The pick list is a document that lists all the materials that are required for a maintenance order. It can be printed after the order release, not before. The order release is the step that confirms that the order is ready to be executed and the materials can be withdrawn from the warehouse. Therefore, option D is incorrect3.
References: 1: Modelling Maintenance Processing - SAP Learning 2: [Manage Maintenance Orders - SAP Help Portal] 3: SAP S/4HANA Asset Management: Plants from a Maintenance ... - SAP PRESS
NEW QUESTION # 47
How does a performance-based maintenance plan calculate the interval between start date and planned date?
- A. Cycle length divided by (monthly performance x 12)
- B. Cycle length divided by annual performance
- C. Cycle length divided by (annual performance/365)
- D. Cycle length divided by ((scheduling period) x (cycle modification factor))
Answer: B
NEW QUESTION # 48
What are valid item categories for a BOM used in Asset Management? Note: There are 3 correct answers to this question.
- A. L (Stock item)
- B. E (Equipment)
- C. F (Functional location)
- D. D (Document item)
- E. I (PM Structure element)
Answer: A,D,E
NEW QUESTION # 49
Which views can you assign to an equipment category via a view profile? Note: There are 2 correct answers to this question?
- A. Manufacturer data
- B. Warranty
- C. Serial data
- D. Configuration
Answer: A,B
NEW QUESTION # 50
What do you have to consider when implementing Ul technologies in SAP S/4HANA Asset Management?
Note: There are 2 correct answers to this question
- A. The cloud version can also use SAP GUI for Windows.
- B. Web Dynpro apps can be used in the SAP Fiori Launchpad.
- C. SAP GUI for HTML can be used in the SAP Fiori Launchpad.
- D. SAP Fiori Launchpad supports only SAPUIS apps.
Answer: B,C
Explanation:
Explanation
When implementing UI technologies in SAP S/4HANA Asset Management, you have to consider the following points:
Web Dynpro apps can be used in the SAP Fiori Launchpad. This is true because Web Dynpro is one of the UI technologies that are supported by the SAP Fiori Launchpad, along with SAP Fiori apps, SAP GUI for HTML, and WebClient UI12.
SAP Fiori Launchpad supports only SAPUI5 apps. This is false because SAP Fiori Launchpad supports not only SAPUI5 apps, but also other UI technologies such as WebDynpro, SAP GUI for HTML, and WebClient UI12.
SAP GUI for HTML can be used in the SAP Fiori Launchpad. This is true because SAP GUI for HTML is one of the UI technologies that are supported by the SAP Fiori Launchpad, along with SAP Fiori apps, Web Dynpro, and WebClient UI12.
The cloud version can also use SAP GUI for Windows. This is false because SAP GUI for Windows is only available for the on-premise version of SAP S/4HANA Asset Management, not for the cloud version31.
References: 3: Explaining the Intelligent Enterprise - SAP Learning 1: UI Technology Guide for SAP S/4HANA 1909 - SAP Online Help 2: SAP S/4HANA UI Technology | SAP Help Portal
NEW QUESTION # 51
You want to set up a general maintenance task list for inspection rounds using the overall time confirmation as a simplified way to record measurement documents. What do you need to do? Note: There are 2 correct answers to this question
- A. Assign a piece of equipment with an allocated measuring point to a task list operation
- B. Assign an inspection lot to the task list header
- C. Assign an inspection document as a PRT to the task list operation.
- D. Assign a measuring point as a production resources/tools (PRT) to a task list operation.
Answer: A,D
NEW QUESTION # 52
How can you assign a material BOM to a piece of equipment?
- A. Via creation of an equipment BOM
- B. Via material BOM header in the serialization data
- C. Via field construction type
- D. Via field model number in the equipment master
Answer: C
Explanation:
Explanation
A material BOM is a list of components that make up a material. It can be used to describe the structure and composition of a product or a spare part. A material BOM can be assigned to one or more technical objects, such as equipment or functional locations, to define the materials required for maintenance activities1.
One way to assign a material BOM to a piece of equipment is via the field construction type in the equipment master. The construction type is a material number that identifies the material BOM for the equipment. By entering the construction type in the equipment master, the system automatically assigns the material BOM to the equipment2.
The other options are incorrect because:
Via field model number in the equipment master: The model number is a material number that identifies the material of the equipment itself, not the material BOM. It is used to create an equipment BOM, which is a list of components that are installed on the equipment. An equipment BOM can be different from a material BOM, as it can reflect the actual configuration of the equipment2.
Via material BOM header in the serialization data: The serialization data is a view in the material master that contains information about the serial numbers of the material. It is not related to the material BOM or the equipment assignment3.
Via creation of an equipment BOM: The creation of an equipment BOM is a different process from the assignment of a material BOM. An equipment BOM can be created from a material BOM, but it does not automatically assign the material BOM to the equipment. An equipment BOM can also be created manually or copied from another equipment2.
References: 1: Using Bills of Materials (BOMs) - SAP Learning 2: SAP PM Bills of Material Tutorial - Free SAP PM Training - ERProof 3: Serialization Data (SAP Library - Material Master (LO-MD-MM))
NEW QUESTION # 53
How does a performance-based maintenance plan calculate the interval between start date and planned date?
- A. Cycle length divided by (monthly performance x 12)
- B. Cycle length divided by annual performance
- C. Cycle length divided by (annual performance/365)
- D. Cycle length divided by ((scheduling period) x (cycle modification factor))
Answer: B
Explanation:
Explanation
A performance-based maintenance plan calculates the interval between start date and planned date by dividing the cycle length by the annual performance. The cycle length is the time or counter reading that is required for one maintenance cycle. The annual performance is the estimated time or counter reading that the object will achieve in one year. For example, if the cycle length is 100 hours and the annual performance is 2000 hours, then the interval is 100/2000 = 0.05 years or 18.25 days. References:
Asset Management in SAP S/4HANA Cloud 2208 | SAP Blogs, section "Final Due Date in Maintenance Orders Based on the Compliance Calculation Method (+ demo)" Highlights for Asset Management in SAP S/4HANA 2021 | SAP Blogs, section "Final Due Date, offered via business function LOG_EAM_IME_1" SAP Help Portal: Maintenance Plan
NEW QUESTION # 54
Which default object type do you use to settle a refurbishment order?
- A. The fixed asset
- B. The material
- C. The WBS element
- D. The cost center
Answer: A
Explanation:
Explanation
A refurbishment order is a type of maintenance order that is used to repair or restore a damaged or defective material. The material is usually a fixed asset, such as a machine or a vehicle, that belongs to the company.
The refurbishment order allows you to track the costs and activities involved in the refurbishment process, and to settle the costs to the fixed asset. The fixed asset is the default object type for the settlement of a refurbishment order, but you can also use other object types, such as the cost center or the WBS element, depending on your business requirements. References: Alibaba Cloud Academy - ACP Cloud Computing Certification Course - Chapter 9: Maintenance Management - Section 9.2: Refurbishment Order
NEW QUESTION # 55
Which component is used to display data in the Technical Object Breakdowns and Technical Object Damages app?
- A. SAP Lumira Designer
- B. SAP Predictive Analysis
- C. SAP S/4HANA Core Data Services
- D. SAP Asset Strategy and Performance Management
Answer: C
NEW QUESTION # 56
You want to set up a scenario for regular maintenance. The first event should take place after 1 year, after that, it is a regular cycle of 6 months. Which parameter do you have to use to map this in the system?
- A. Scheduling indicator
- B. Package hierarchy
- C. Maintenance package offset
- D. Cycle modification factor
Answer: C
NEW QUESTION # 57
What do you need to configure to enable entries in the action log of a piece of equipment?
- A. Define history related fields in the usage period customizing.
- B. Define the corresponding history related field for the equipment reference category.
- C. Activate the change documents for the equipment reference category.
- D. Activate the change documents for the equipment category.
Answer: D
Explanation:
Explanation
The action log is a function that allows you to view the changes that were made to fields during the processing of an order or a piece of equipment. The action log shows you the date, time, user, sub-object, field name, old value, and new value of each change. To enable entries in the action log of a piece of equipment, you need to activate the change documents for the equipment category. The equipment category is a classification of equipment that determines the data that can be maintained for the equipment. The change documents are records of the changes that are made to the data of the equipment. You can activate the change documents for the equipment category in the Customizing for Technical Objects under Equipment Define Equipment Categories . You do not need to define history related fields in the usage period customizing, as this is only relevant for the equipment history. The equipment history is a function that allows you to view the usage periods of the equipment, such as the installation, removal, or transfer dates. The history related fields are fields that are relevant for the equipment history, such as the functional location, the maintenance plant, or the cost center. You can define the history related fields in the Customizing for Technical Objects under Equipment Define History-Related Fields for Usage Periods . You do not need to define or activate the change documents for the equipment reference category, as this is only relevant for the equipment reference. The equipment reference is a function that allows you to link a piece of equipment to another object, such as a material, a serial number, or a document. The equipment reference category is a classification of equipment references that determines the data that can be maintained for the equipment reference. You can define the equipment reference category in the Customizing for Technical Objects under Equipment Define Equipment Reference Categories . You can activate the change documents for the equipment reference category in the Customizing for Technical Objects under Equipment Define Change Documents for Equipment Reference Categories . References:
Display of the Action Log, section "Use"
Equipment Categories, section "Change Documents"
History-Related Fields for Usage Periods, section "History-Related Fields" Equipment Reference Categories, section "Change Documents"
NEW QUESTION # 58
What do you have to consider when setting up the refurbishment process?
- A. Mark the order type for refurbishment in customizing.
- B. Assign a stock determination rule to the PM order type
- C. Assign a view profile for refurbishment to the order type.
- D. Assign valuation type C to the order type.
Answer: A
NEW QUESTION # 59
Which component is used to display data in the Technical Object Breakdowns and Technical Object Damages app?
- A. SAP Predictive Analysis
- B. SAP Asset Strategy and Performance Management
- C. SAP S/4HANA Core Data Services
- D. SAP Lumira Designer
Answer: D
Explanation:
Explanation
The Technical Object Breakdowns and Technical Object Damages app use SAP Lumira Designer to display data in a user-friendly and interactive way. SAP Lumira Designer is a tool that allows you to create analytical applications and dashboards based on SAP S/4HANA Core Data Services (CDS) views. SAP Asset Strategy and Performance Management and SAP Predictive Analysis are not components used to display data in this app, but they are other solutions that can help you optimize your asset management strategy and performance.
References:
Technical Object Breakdowns
Technical Object Damages
[SAP Lumira Designer]
NEW QUESTION # 60
......
SAP C-S43-2022 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
Download Latest & Valid Questions For SAP C-S43-2022 exam: https://www.exam4pdf.com/C-S43-2022-dumps-torrent.html
Ensure Success With Updated Verified C-S43-2022 Exam Dumps: https://drive.google.com/open?id=1J245_pKLdkxYLKEmIiL25RFeF9dWYCip
