Get ready to pass the JN0-610 Exam right now using our JNCIP-Cloud Exam Package
A fully updated 2021 JN0-610 Exam Dumps exam guide from training expert Exam4PDF
NEW QUESTION 33
You are connecting your on-premises data center to the Azure cloud.
In this scenario, which connection gateway service is implemented within the Azure cloud by Contrail Enterprise Multicloud?
- A. virtual private gateway
- B. customer gateway
- C. virtual network gateway
- D. multicloud gateway
Answer: A
NEW QUESTION 34
Exhibit.
Referring to the exhibit, which statement is true about virtual networks A and B so that the vSRX can be used as a service instance in a transparent service chain?
- A. Virtual networks A and B must have different CIDR addressing.
- B. Virtual networks A and B must have the same CIDR addressing.
- C. Virtual networks A and B must be running on different host servers.
- D. Virtual networks A and B must be running on the same host server.
Answer: A
NEW QUESTION 35
Which statement is correct about service chaining?
- A. All hosts must be in the same network subnet.
- B. Service chaining is always Layer 2 based.
- C. The right service interface is always the ingress for traffic.
- D. All traffic entering the left interface must exit the right interface.
Answer: C
NEW QUESTION 36
You are connecting your private cloud with services running in a Microsoft Azure public cloud. In this scenario, which two actions must be completed to accomplish this task? (Choose two.)
- A. You must enable NETCONF on all devices in your private cloud environment.
- B. Time must be synchronized on all the nodes with NTP.
- C. DNS settings on all devices must point to Microsoft for resolution.
- D. All the on-premises nodes must have private IP addresses except the management interfaces.
Answer: A,C
NEW QUESTION 37
Exhibit.
Your orchestrator has deployed three virtual machines on the compute nodes and deployed a VNF as shown in the exhibit. You request that a service chain be established so that traffic from VM-1 to VM-2 is steered through VNF-1. Because of a connectivity problem, you must now verify that the necessary routes are present in the routing tables on the required nodes.
In this scenario, which nodes should you inspect?
- A. the spine and leaf nodes only
- B. H-1, H-2, H-3 compute nodes only
- C. H-1, H-2, H-3, H-4 compute nodes only
- D. H-1 and H-2 compute nodes only
Answer: C
NEW QUESTION 38
You are deploying resources within Microsoft Azure integrated with Contrail.
Which set of components must be defined in this scenario?
- A. region, resource group, VNET, security groups, instance details
- B. region, VNET, security groups, EC2 instance details
- C. region, resource group, VPC, security groups, instance details
- D. region, VPC, security groups, EC2 instance details
Answer: D
NEW QUESTION 39
Exhibit.
Referring to the exhibit, which two lines must be changed to allow AppFormix to successfully query the vCenter Server for host and VM metrics? (Choose two.)
- A. Change the path from appformix-openstack-images-<version>. tar.gz to appformix-aws-images-<version>.tar.gz.
- B. Change appformix_network_device_monitoring_enabled: true to appformix network device monitoring enabled: yes.
- C. Change vcenter_platform_enabled: yes to vcenter_platform_enabled: true.
- D. Change the path from appformix-openstack-images-<version>.tar.gz to
appformix-vcenter-images-<version>.tar.gz.
Answer: C,D
NEW QUESTION 40
What is a core component of an AWS cloud environment?
- A. a VNET
- B. a resource group
- C. a vRouter
- D. a VPC
Answer: B
NEW QUESTION 41
Exhibit.
Referring to the exhibit, three microservices are deployed in an OpenShift cluster, each in a separate OpenShift project. The Web pod exposes the Web front end through a service. The App pod exposes an application API through a second service. You are asked to assign Web services external IP addresses out of the 100.64.0.0/24 subnet, and the App AIP external IP addresses from the 100.64.128.0/24 subnet.
How would you accomplish this task?
- A. Configure a namespace isolation policy.
- B. Use a Contrail network policy to match the microservice IP addresses, and advertise them to the external networks.
- C. Use an OpenShift network policy applied to each of the exposed microservices.
- D. Apply the opencontrail.org/fip-pool annotation to each project namespace.
Answer: B
NEW QUESTION 42
Which two statements are correct when deploying or integrating OpenShift with Contrail Enterprise Multicloud? {Choose two.)
- A. NFS for OpenShift logging is recommended.
- B. Contrail Command for deployment is not supported.
- C. When using a load balancer, manually copy the htpasswd file into all of the master nodes.
- D. NTP is installed automatically and synchronized.
Answer: A,D
NEW QUESTION 43
You are working with Contrail multicloud using Azure cloud. You want to modify the topology to add extra resources. Which two steps must be performed to accomplish this task? (Choose two.)
- A. Edit the topology.dat file.
- B. Execute the modify.sh script.
- C. Execute the modify.yml Ansible playbook.
- D. Edit the topology.yml file.
Answer: D
NEW QUESTION 44
Exhibit.
You successfully run the Ansible playbook shown in the exhibit. However, you are unable to see the instances you created.
What is the problem in this scenario?
- A. You have incorrectly entered your key information.
- B. You are viewing the wrong region.
- C. Your s3 bucket was not accessible during the deployment.
- D. You are viewing the correct region in the wrong VPC.
Answer: A
NEW QUESTION 45
Exhibit.
Your company uses Kubernetes as an orchestrator integrated with Contrail. You are asked to create the networks shown in the exhibit and enable communication between Pod 1 and Pod 2.
Which three steps must be performed in this scenario? (Choose three.)
- A. Create VN-A and VN-B.
- B. Apply a created network policy.
- C. Assign IP addresses to the pods.
- D. Update permissions in the security group. Create Namespace A and Namespace B.
Answer: A,B,C
NEW QUESTION 46
Users mention that an application has network connectivity issues orchestrated by Kubernetes. To troubleshoot the issue, you must obtain the IP addresses of the pods used by the application.
In this scenario, which command will accomplish this task?
- A. kubect1 describe pods
- B. kubect1 get services
- C. kubect1 explain pods
- D. kubect1 config view
Answer: D
NEW QUESTION 47
An OpenShift cluster operator wants to verify the health of the cluster network infrastructure. In this scenario, which method should the operator use to accomplish this task?
- A. Issue the oc get daemonset -n contrail-system command on the master node.
- B. Issue the contrail-status command on the infrastructure node.
- C. Issue the contrail-status command on the master node.
- D. Issue the oc get pods -n contrail-system command on the master node.
Answer: A
NEW QUESTION 48
You are deploying a service chain in your cloud environment. You want to have the traffic evaluated by a Layer 3 firewall and a load balancing service before reaching its destination.
In this scenario, which service mode should be used?
- A. analyzer
- B. in-network
- C. firewall
- D. transparent
Answer: C
NEW QUESTION 49
Which statement is correct about Contrail Enterprise Multicloud (CEM)?
- A. CEM can only manage network overlay functions.
- B. CEM can only connect to BMS and VM resource workloads.
- C. CEM can only be used to connect private clouds together.
- D. CEM can connect any type of cloud environment.
Answer: C
NEW QUESTION 50
Exhibit.
Referring to the exhibit, what is the correct order of workflow to delete the vSRX?
- A. Delete the policy, delete the instance, and then delete the template.
- B. Delete the template, delete the instance, and then delete the policy.
- C. Delete the instance, delete the policy, and then delete the template.
- D. Shutdown and delete the instance from the Horizon user interface.
Answer: D
NEW QUESTION 51
Exhibit.
Referring to the exhibit, which component will be used for the underlay connectivity of the ESXi host?
- A. a host unique vSwitch
- B. the vSwitchO
- C. a distributed vSwitch
- D. the cntr-vswitch
Answer: A
NEW QUESTION 52
Which two roles does Contrail Enterprise Multicloud place on IP Fabric devices in a centrally-routed environment? (Choose two.)
- A. Leaves are Layer 2 VXLAN gateways.
- B. Spines are Layer 2 VXLAN gateways.
- C. Leaves are Layer 3 VXLAN gateways.
- D. Spines are Layer 3 VXLAN gateways.
Answer: A,C
NEW QUESTION 53
Your customer asks you to create a service VM to be used for deep packet inspection. You are also asked to ensure that the service does not modify the packet.
Which two service modes would you use in this situation? (Choose two.)
- A. in-network
- B. in-network NAT
- C. transparent
- D. transparent NAT
Answer: A,D
NEW QUESTION 54
......
Master 2021 Latest The Questions JNCIP-Cloud and Pass JN0-610 Real Exam!: https://www.exam4pdf.com/JN0-610-dumps-torrent.html
