[Jul-2023 Newly Released] HPE6-A72 Dumps for Aruba Certified Switching Associate (ACSA) V1 Certified
Updated Verified HPE6-A72 dumps Q&As - 100% Pass
NEW QUESTION # 54
Click on the colored box that corresponds with the line that best represents Multicast traffic flow.
Answer:
Explanation:
Explanation:
Blue Box
NEW QUESTION # 55
Refer to the exhibit.
You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?
- A. Access-2# configure
Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2 - B. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - C. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - D. Access-2# configure
Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
Answer: C
Explanation:
This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
NEW QUESTION # 56
The following command is issued:
Switch# checkpoint rollback start
What is the result?
- A. The command will fail because it is incomplete.
- B. The switch will use the checkpoint 'rollback1 as the starting configuration on next reboot.
- C. The command will fail because rollback commands must be issued from global-config mode.
- D. The switch will revert the running-configuration to the checkpoint called 'start1 without a reboot.
Answer: D
NEW QUESTION # 57
With what other technology does Half Duplex communication closely match?
- A. CB radio using push-to-talk
- B. a pair of fiber optic strands allowing transmit on one and receive on the other at the same time
- C. point-to-point connections between two switches allowing concurrent transmit and receive
- D. a mobile phone call
Answer: A
NEW QUESTION # 58
What are the benefits of a 3-Tier design over a 2-Tier? (Choose two.)
- A. Can use lower speed links between Core to Aggregation and Aggregation to Access given the use of an Aggregation layer.
- B. Better scalability in a campus with a large number of buildings.
- C. Offloading processing from the Core without routing at the Access layer.
- D. Lowering the cost of a deployment due to needing less switches overall.
- E. Gaining the flexibility to connect the Data-Center to any Access layer switch.
Answer: B,C
NEW QUESTION # 59
Review the exhibit.
As the frame traverses from **PC-1** to **Server-1**, the VLAN tag will be removed.
Click on the interface (circled in green) where the VLAN tag will be removed.
Answer:
Explanation:
NEW QUESTION # 60
The customer has 778 developers testing computer games on the network.
Which two actions resolve Broadcast storms? (Choose two.)
- A. Enable single Area Open Shortest Path First (OSPF) on all Layer 2 switches, but do not enable routing.
- B. Utilize Spanning Tree to dynamically block Designated ports in addition to Alternate ports.
- C. Setting switch ports to half-duplex will resolve Broadcast storms using Carrier Sense Multiple-Access Collision Detection (CSMA/CD).
- D. Manually disable the redundant link to immediately resolve the impacted portion of the network.
- E. Utilize Spanning Tree to dynamically disable all redundant links in a segment.
Answer: D,E
NEW QUESTION # 61
Refer to the exhibit.
What is the correct binary conversion of the last two hexadecimal characters of the physical address?
- A. 1001 1111 0101 0011
- B. 1110 1101
- C. 1000 1101 1110 1101
- D. 1101 1000
Answer: B
NEW QUESTION # 62
What are two features of the three-tier designs? (Choose two.)
- A. adds a distribution layer to free up resources from the Core for improved performance and routing throughput
- B. removes the distribution layer in favor of a spine-leaf design used in modern data center deployments
- C. uses only Layer 2 access on the Access and the Core with Layer 3 routing and access control provided at the distribution layer
- D. a more scalable design over by leveraging a distribution layer to handle Layer 3 routing and access control in large deployments
- E. is considered legacy by requiring a large flat layer-two broadcast domain from Core to Access and should be avoided
Answer: A,D
NEW QUESTION # 63
Which two statements accurately describe stacking with Aruba switches? (Choose two.)
- A. VSF is a core or aggregation layer stacking technology due to the high resiliency of sharing a single control plane.
- B. The VSF feature is not compatible between AOS-CX and AOS platforms.
- C. A VSF stack is allowed between an AOS-CX 6300M and 6300F switches.
- D. A VSF stack is allowed between an AOS 5400R and an AOS-CX 6400.
- E. VSF and VSX are stacking option with the AOS-CX 8320. 8325. 8400. and 6400 models.
Answer: A,E
NEW QUESTION # 64
What is the login and password combination is used when first configuring an Aruba OS-CX switch from factory defaults?
- A. Login admin and password forgetme!
- B. Login admin and password admin.
- C. Login admin and password field empty.
- D. Login admin and password password.
Answer: C
NEW QUESTION # 65
Which two options are the Layer 2 protocols? (Choose two.)
- A. RIP
- B. IPSec
- C. 802.11af
- D. STP
- E. 802.1Q
Answer: D,E
NEW QUESTION # 66
What are the commands to disable SSH and HTTPS services from the default VRF?
- A. Core-1(config)# no ssh server enable Core-1(config)# no https-server enable
- B. Core-1(config)# no ssh server vrf default Core-1(config)# no https-server vrf default
- C. Core-1# no ssh server vrf default Core-1# no https-server vrf default
- D. Core-1(config)# no ssh server Core-1(config)# no https-server
Answer: B
NEW QUESTION # 67
Match each network protocol to the correct default listening port and transport protocol. Not all answers will be used.
Answer:
Explanation:
NEW QUESTION # 68
Refer to the exhibit
Which command on Access-2 port 1/1/4 will enable connectivity between PC-1 and Server-1 without any routing enabled in the network?
- A. Access-2 (config-if-1/1/4)# vlan access 20
- B. Access-2 (config-if-1/1/4)# vlan 20 untag 1/1/4
- C. Access-2 (config-if-1/1/4)# vlan access 1, 10, 20, 255
- D. Access-2 (config-if-1/1/4)# vlan trunk allow 1, 10, 255
Answer: A
NEW QUESTION # 69
Match the switching term to the correct definition.
Answer:
Explanation:
NEW QUESTION # 70
......
HPE6-A72 exam is intended for IT professionals who have experience in network switching and want to validate their skills and knowledge. It is also suitable for those who are new to network switching and want to build a foundation in this area. Aruba Certified Switching Associate Exam certification is particularly relevant for network administrators, network engineers, and network technicians who work with HPE Aruba switches.
HP HPE6-A72 (Aruba Certified Switching Associate) exam is a certification exam that is designed to test the knowledge and skills of IT professionals in the area of network switching. HPE6-A72 exam is created by Aruba Networks, a leading provider of wireless and wired networking solutions, and it is intended for individuals who are interested in becoming certified in Aruba switching technologies. HPE6-A72 exam covers a range of topics, including switch configuration, VLANs, link aggregation, and multicast.
Latest HPE6-A72 Exam Dumps HP Exam from Training: https://www.exam4pdf.com/HPE6-A72-dumps-torrent.html
New 2023 Latest Questions HPE6-A72 Dumps - Use Updated HP Exam: https://drive.google.com/open?id=1-EO1_Q7ALeyO4ypK-HTZ44u4Ee9OkneG
