Latest Nutanix NCA-6.5 Exam questions and answers
Exam4PDF NCA-6.5 Exam Practice Test Questions (Updated 135 Questions)
NEW QUESTION # 39
Assuming Sufficient Storage Capacity , how long are entities kept in the prism recycle bin?
- A. 8 hours
- B. 1 month
- C. 24 hours
- D. 1 week
Answer: C
NEW QUESTION # 40
An administrator needs to deploy a two-node cluster on a new ROBO Site. What is required to maintain High Availability in the case of a node failure?
- A. Windows Failover Clustering
- B. Metro-Availability
- C. Async Replication
- D. Witness VM
Answer: D
Explanation:
To maintain high availability in the case of a node failure in a two-node cluster, a Witness VM is required. Therefore, the correct answer is A. The Witness VM acts as a tie-breaker and arbitrator in the event of a split-brain scenario, where both nodes lose connectivity to each other, to ensure that only one node continues to operate and serve workloads. It is also recommended to use a high-performance network to minimize network latency between the two nodes and the Witness VM.
NEW QUESTION # 41
Refer to the exhibit.
A team member has built a CentOS VM image for use as a template.
An administrator deploys a new VM using the CentOS image as the 05 drive. No other drives are presented to the VM.
Following the deployment, the administrator attempts to boot the VM, but is unsuccessful.
What could be causing this issue?
- A. No Volume Groups have been created for the VM
- B. The VMS Boot Priority must reference disk first before CD-ROW
- C. The CentOS VM image was built with UEF:
- D. The VM's Disk (scsi.O) setting must be set to make this disk bootable
Answer: C
NEW QUESTION # 42
What is the effect of enabling Flash Mode?
- A. Sets the storage tier preference to SSD
- B. Sets the storage tier preference to HDD
- C. Sets the metadata tier preference to HDD
- D. Sets the metadata tier preference to SSD
Answer: A
Explanation:
Enabling Flash Mode will set the storage tier preference to SSD, meaning that data will be stored on the high-performance SSD storage tier. Flash Mode is designed to speed up the performance of applications by ensuring that the most frequently used data is stored on the faster storage tier. Reference: https://portal.nutanix.com/page/documents/details?targetId=Platform-Administrator-Guide-v5_7:pag-flash-mode-c.html
NEW QUESTION # 43
An administrator has recently expanded the Nutanix cluster and noticed that NCC health checks and alerts for newly-added nodes are not being received via email.
What should administrator do to resolve this issue?
- A. Add CVM IP in SMTP Relay
- B. Configure SMTP
- C. Run NCC Health Check
- D. Reboot Nutanix cluster
Answer: B
Explanation:
In order to resolve the issue of not receiving NCC health checks and alerts for newly-added nodes via email, the administrator should configure SMTP (Simple Mail Transfer Protocol) settings. SMTP is used to send email notifications from the Nutanix cluster, and if it is not configured properly, the health checks and alerts will not be sent via email. The administrator should check the SMTP settings in the Prism web console and ensure that they are correct and that the correct email address is specified for receiving notifications. This will ensure that the health checks and alerts for the newly-added nodes are sent to the correct recipient.
NEW QUESTION # 44
What type of relationship does a VM Affinity policy define?
- A. VM to Storage tier
- B. VM to Host
- C. VM to Network VLAN
- D. VM to VM
Answer: B
Explanation:
The type of relationship that a VM Affinity policy defines is VM to Host. A VM Affinity policy is used to specify which host a virtual machine should be placed on. This can be used to ensure that certain VMs are always running on the same host for performance or availability reasons. Additionally, VM Affinity policies can also be used to ensure that VMs are spread across multiple hosts for better load balancing.
NEW QUESTION # 45
An administrator notices that a VM is slow and unresponsive. The administrator wants to compare performance to other VMs on cluster.
Which chart type is best suited to display multiple VM performance metrics for diagnosis?
- A. Analysis Chart
- B. Metric Chart
- C. Entity Chart
- D. Dashboard Chart
Answer: B
NEW QUESTION # 46
An administrator manages a memory-sensitive application that consists of multiple VMs. The administrator needs to understand if workloads, historically, have been evenly distributed across these VMs.
What should the administrator do?
- A. Run cluster efficiency summary report selecting all the VMs that constitute the applications.
- B. Filter VMs list by using Memory Usage.
- C. Add Memory usage chart to Analysis dashboard for each required VM.
- D. Create an Alert Policy with VM as entity type and memory usage as a metric.
Answer: B
NEW QUESTION # 47
Refer to the exhibit.
During VM creation, an administrator clicked on * Add New NIC, but there is nothing in the Network Name dropdown list. What is causing this issue?
- A. The nodes nave no NiCs attached to them
- B. Only 1G NIC is attached to the Nutanix nodes
- C. No physical NICs have been allocated for user VMs
- D. A network was not created during Network Configuration
Answer: D
NEW QUESTION # 48
Which cluster configuration is LCM unable to perform firmware upgrades against?
- A. Five-node
- B. Two - node
- C. Three-node
- D. Single-node
Answer: D
Explanation:
LCM (Lifecycle Manager) is a tool provided by Nutanix to automate software and firmware upgrades for Nutanix clusters. However, LCM is unable to perform firmware upgrades against a (D) Single-node cluster configuration.
This is because a single-node cluster does not have any redundancy, so there is no way to perform an upgrade without taking the entire cluster offline. In contrast, multi-node clusters can typically be upgraded in a rolling fashion, with one or more nodes being upgraded at a time while the rest of the cluster remains online.
LCM is capable of performing firmware upgrades against two-node, three-node, and five-node cluster configurations, as long as they meet the other requirements for LCM support (such as being on a supported AOS release and having the appropriate network connectivity).
NEW QUESTION # 49
An administrator wants to view VMs with NGT Installed and Filter by their installed guest operating systems.
How can this task most quickly be accomplished within prism central?
- A. use the Prism central analysis Panel to create a pie chart by OSType
- B. Use a pre-defined Prism Central report
- C. Create a custome Focus using the OS Column
- D. In the VM dashboard , filter by the nutanix Guest tools - OS field
Answer: D
Explanation:
Explanation/Reference:
Please Re Check From your Side and let me know if the question correction is required
NEW QUESTION # 50
What is the biggest benefit of the Redfish Protocol and LCM?
- A. AOS and AHV update twice as quickly
- B. SSD and HDD update twice as quickly
- C. HBA and NIC card update twice as quickly
- D. BMC and BIOS update twice as quickly
Answer: D
Explanation:
The Redfish Protocol and Lifecycle Manager (LCM) provide the biggest benefit of allowing BMC and BIOS updates to be done twice as quickly as before. This is because Redfish and LCM allow for updates to be done in parallel, rather than serially, which reduces the amount of time it takes for an update to be completed. Reference: https://portal.nutanix.com/page/documents/details?targetId=Platform-Administrator-Guide-v5_7:pag-redfish-lcm-c.html
NEW QUESTION # 51
What happens to images that are imported into Prism Central?
- A. Remain in the source duster after import
- B. Deleted from the source cluster after import
- C. Copied to the Prism Central image repository
- D. Copied to all clusters managed by Prism Central
Answer: C
Explanation:
The Prism Central image repository is a centralized location for storing virtual machine images that can be used to deploy VMs to any cluster managed by Prism Central. When an image is imported into Prism Central, a copy of the image is made and stored in the repository, so that it can be easily accessed and deployed to any cluster as needed.
The original image file typically remains in the source cluster after it is imported into Prism Central, unless it is explicitly deleted. Similarly, the image copy in the Prism Central repository is not automatically copied to all clusters managed by Prism Central, but can be used to deploy new VMs on any cluster as needed.
NEW QUESTION # 52
Where can an administrator find information about the Cluster Runway?
- A. Prism Element Analysis
- B. Prism Element Home Page
- C. Prism Central Analysis
- D. Prism Central Main Dashboard
Answer: D
Explanation:
The Cluster Runway is located in the Prism Element Analysis dashboard. The Cluster Runway provides an overview of the cluster's performance, including CPU, Memory, and Disk usage, and can be used to identify any potential performance issues. Reference: https://portal.nutanix.com/page/documents/details?targetId=Prism-Admin-Guide-v5_6:pr-dashboard-overview-c.html
NEW QUESTION # 53
Which Nutanix data efficiency mechanism replaces a traditional Replication Factor for suitable data?
- A. Intelligent Cloning
- B. Erasure Coding
- C. Deduplication
- D. Compression
Answer: B
Explanation:
Erasure coding is a data efficiency mechanism in Nutanix that replaces the traditional replication factor for suitable data. Erasure coding uses a technique known as "forward error correction" to spread data across multiple drives in a cluster, such that if some drives fail, the data can still be reconstructed. This allows for a much higher storage density and a more efficient use of disk space as compared to traditional replication, where multiple copies of the same data are stored across multiple drives. Deduplication and Compression are also data efficiency mechanisms in Nutanix which help to reduce the storage overhead by eliminating the redundant data. Intelligent Cloning is a Nutanix feature which helps to create multiple instant, space-efficient clones of a VM. Reference: https://portal.nutanix.com/page/documents/details?targetId=Data-Services-Guide-v2_11:ds-erasure-coding-overview_ds-erasure-coding-overview.html
NEW QUESTION # 54
What is the minimum cluster size for Redundancy Factor 3?
- A. 4 nodes
- B. 3 nodes
- C. 6 nodes
- D. 5 nodes
Answer: D
Explanation:
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_20:arc-redundancy-factor3-c.html
NEW QUESTION # 55
Which storage protocol is used to attach a container to an ESXi host?
- A. FCoE
- B. SMB
- C. NFS
- D. CIFS
Answer: C
NEW QUESTION # 56
......
Nutanix NCA-6.5 Certification Exam is a globally recognized certification program that validates an individual's knowledge and skills in the field of HCI and virtualization. It is designed for IT professionals who are involved in the deployment, management, and maintenance of Nutanix HCI solutions, and covers a range of topics including Nutanix architecture, installation and configuration, cluster management, data protection, and troubleshooting. By obtaining this certification, individuals can demonstrate their competency in the field of HCI and virtualization and enhance their career prospects.
Pass Your Nutanix Exam with NCA-6.5 Exam Dumps: https://www.exam4pdf.com/NCA-6.5-dumps-torrent.html
Pass NCA-6.5 Exam Info and Free Practice Test: https://drive.google.com/open?id=1NaAzTcFMylJYMVGtyzw7aIbrxAafZFBf
