Pass Your Exam Easily! JN0-636 Real Question Answers Updated on Jan 29, 2023
Actual Questions Answers Pass With Real JN0-636 Exam Dumps
Juniper JN0-636 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION 23
You are asked to download and install the IPS signature database to a device operating in chassis cluster mode. Which statement is correct in this scenario?
- A. The first time you synchronize the IPS signature package from the primary node to the backup node, the primary node must be rebooted.
- B. The IPS signature package must be downloaded and installed on the primary and backup nodes.
- C. The first synchronization of the backup node and the primary node must be performed manually.
- D. You must download and install the IPS signature package on the primary node.
Answer: B
NEW QUESTION 24
You have the NAT rule, shown in the exhibit, applied to allow communication across an IPsec tunnel between your two sites with identical networks. Which statement is correct in this scenario?
- A. The NAT rule with translate the source and destination addresses.
- B. The NAT rule in applied to the N/A routing instance.
- C. The NAT rule will only translate two addresses at a time.
- D. 10 packets have been processed by the NAT rule.
Answer: A
NEW QUESTION 25
Which statement is true about persistent NAT types?
- A. The target-host-port parameter cannot be used with IPv4 addresses in NAT46.
- B. The target-host parameter cannot be used with IPv6 addressee in NAT64.
- C. The target-host parameter cannot be used with IPv4 addresses inNAT46
- D. The target-host-port parameter cannot be used with IPv6 addresses in NAT64
Answer: C
NEW QUESTION 26
Exhibit
Referring to the exhibit, which three statements are true? (Choose three.)
- A. The packet originated within the Trust zone.
- B. The packet is allowed to make an SSH connection.
- C. The packet's destination is to an interface on the SRX Series device.
- D. The packet is dropped before making an SSH connection.
- E. The packet's destination is to a server in the DMZ zone.
Answer: A,C,D
NEW QUESTION 27
Exhibit
You are not able to ping the default gateway of 192.168 100 1 (or your network that is located on your SRX Series firewall.
Referring to the exhibit, which two commands would correct the configuration of your SRX Series device?
(Choose two.)
A)
B)
C)
D)
- A. Option B
- B. Option C
- C. Option D
- D. Option A
Answer: B
NEW QUESTION 28
Exhibit
Referring to the exhibit, which statement is true?
- A. This custom block list feed will be used instead of the Juniper Seclntel block list feed
- B. This custom block list feed will be used after the Juniper Seclntel block list feed.
- C. This custom block list feed will be used before the Juniper Seclntel
- D. This custom block list feed cannot be saved if the Juniper Seclntel block list feed is configured.
Answer: B
NEW QUESTION 29
You opened a support ticket with JTAC for your Juniper ATP appliance. JTAC asks you to set up access to the device using the reverse SSH connection.Which three setting must be configured to satisfy this request? (Choose three.)
- A. Enable a JATP support account.
- B. Enable JTAC remote access
- C. Create a temporary root account.
- D. Create a temporary admin account.
- E. Enable remote support.
Answer: A,D,E
Explanation:
https://kb.juniper.net/InfoCenter/index?page=content&id=TN326&cat=&actp=LIST&showDraft=false
NEW QUESTION 30
You are deploying a virtualization solution with the security devices in your network Each SRX Series device must support at least 100 virtualized instances and each virtualized instance must have its own discrete administrative domain.
In this scenario, which solution would you choose?
- A. logical systems
- B. virtual router instances
- C. VRF instances
- D. tenant systems
Answer: A
NEW QUESTION 31
Exhibit
You configure Source NAT using a pool of addresses that are in the same subnet range as the external ge-0/0/0 interface on your vSRX device. Traffic that is exiting the internal network can reach external destinations, but the return traffic is being dropped by the service provider router.
Referring to the exhibit, what must be enabled on the vSRX device to solve this problem?
- A. DNS Doctoring
- B. Proxy ARP
- C. Persistent NAT
- D. STUN
Answer: A
NEW QUESTION 32
Exhibit
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The data that traverses the ge-O/0/0 interface is secured by a connectivity association key.
- B. The data that traverses the ge-070/0 interface can be intercepted and read by anyone.
- C. The data that traverses the ge-0/070 interface is secured by a secure association key.
- D. The data that traverses the ge-070/0 interface cannot be intercepted and read by anyone.
Answer: B,D
NEW QUESTION 33
Exhibit
Which two statements are correct about the output shown in the exhibit? (Choose two.)
- A. The packet matches a configured security policy.
- B. The packet is processed as host inbound traffic.
- C. The packet is processed in the first path packet flow.
- D. The packet matches the default security policy.
Answer: B,D
NEW QUESTION 34
Exhibit
Referring to the exhibit, which three protocols will be allowed on the ge-0/0/5.0 interface? (Choose three.)
- A. OSPF
- B. NTP
- C. IPsec
- D. IBGP
- E. DHCP
Answer: A,B,C
NEW QUESTION 35
Exhibit
You are using ATP Cloud and notice that there is a host with a high number of ETI and C&C hits sourced from the same investigation and notice that some of the events have not been automatically mitigated.
Referring to the exhibit, what is a reason for this behavior?
- A. The C&C events are false positives.
- B. The infected host score is globally set bellow a threat level of 5.
- C. The ETI events are false positives.
- D. The infected host score is globally set above a threat level of 5.
Answer: C
NEW QUESTION 36
You want to identify potential threats within SSL-encrypted sessions without requiring SSL proxy to decrypt the session contents. Which security feature achieves this objective?
- A. DNS security
- B. infected host feeds
- C. Secure Web Proxy
- D. encrypted traffic insights
Answer: A
NEW QUESTION 37
Your company wants to use the Juniper Seclntel feeds to block access to known command and control servers, but they do not want to use Security Director to manage the feeds.
Which two Juniper devices work in this situation? (Choose two)
- A. SRX Series devices
- B. EX Series devices
- C. MX Series devices
- D. QFX Series devices
Answer: D
NEW QUESTION 38
Exhibit
You are trying to configure an IPsec tunnel between SRX Series devices in the corporate office and branch1.
You have committed the configuration shown in the exhibit, but the IPsec tunnel is not establishing.
In this scenario, what would solve this problem.
- A. Change the local identity to inet advpn on the branch1 device.
- B. Change the IKE mode to aggressive on the branch1 and corporate devices.
- C. Add multipoint to the st0.0 interface configuration on the branch1 device.
- D. Change the IKE proposal-set to compatible on the branch1 and corporate devices.
Answer: A
NEW QUESTION 39
Your organization has multiple Active Directory domain to control user access. You must ensure that security polices are passing traffic based upon the user's access rights.
What would you use to assist your SRX series devices to accomplish this task?
- A. JATP Appliance
- B. JIMS
- C. JSA
- D. Junos Space
Answer: B
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-user-auth-configure-jims.html
NEW QUESTION 40
Regarding IPsec CoS-based VPNs, what is the number of IPsec SAs associated with a peer based upon?
- A. The number of forwarding classes configured for the VPN.
- B. The number of traffic selectors configured for the VPN.
- C. The number of CoS queues configured for the VPN.
- D. The number of classifiers configured for the VPN.
Answer: B
NEW QUESTION 41
Exhibit
You have recently configured Adaptive Threat Profiling and notice 20 IP address entries in the monitoring section of the Juniper ATP Cloud portal that do not match the number of entries locally on the SRX Series device, as shown in the exhibit.
What is the correct action to solve this problem on the SRX device?
- A. You must configure the DAE in a security policy on the SRX device.
- B. Flush the DNS cache on the SRX device.
- C. Refresh the feed in ATP Cloud.
- D. Force a manual download of the Proxy__Nodes feed.
Answer: B
NEW QUESTION 42
Exhibit
You are validating bidirectional traffic flows through your IPsec tunnel. The 4546 session represents traffic being sourced from the remote end of the IPsec tunnel. The 4547 session represents traffic that is sourced from the local network destined to the remote network.
Which statement is correct regarding the output shown in the exhibit?
- A. The local gateway address for the IPsec tunnel is 10.20.20.2
- B. The remote gateway address for the IPsec tunnel is 10.20.20.2
- C. The session information indicates that the IPsec tunnel has not been established
- D. NAT is being used to change the source address of outgoing packets
Answer: B
NEW QUESTION 43
You are asked to allocate security profile resources to the interconnect logical system for it to work properly.
In this scenario, which statement is correct?
- A. The resources must be calculated based on the amount of traffic that will flow between the logical systems.
- B. No resources are needed to be allocated to the interconnect logical system.
- C. The NAT resources must be defined in the security profile for the interconnect logical system.
- D. The flow-session resource must be defined in the security profile for the interconnect logical system.
Answer: A
NEW QUESTION 44
......
New JN0-636 Dumps - Real Juniper Exam Questions: https://www.exam4pdf.com/JN0-636-dumps-torrent.html
JN0-636 Dumps Prepare Your Exam With 94 Questions: https://drive.google.com/open?id=1uI2V7GytafwuyMwk1vkcRdBWHeH6sloX
