Use the best ways of preparing for NSE5_FAZ-6.2 Exam Dumps with Exam4PDF Fortinet NSE5_FAZ-6.2 dump PDF [2021]
Fortinet NSE5_FAZ-6.2 exam candidates will surely pass the Exam if they consider the NSE5_FAZ-6.2 dumps learning material presented by Exam4PDF.
NEW QUESTION 39
How do you restrict an administrator's access to a subset of your organization's ADOMs?
- A. Assign the ADOMs to the administrator's account
- B. Configure trusted hosts
- C. Assign the default Super_User administrator profile
- D. Set the ADOM mode to Advanced
Answer: A
NEW QUESTION 40
View the exhibit.
Why is the total quota less than the total system storage?
- A. The oftpd process has not archived the logs yet
- B. The logfiled process is just estimating the total quota
- C. Some space is reserved for system use, such as storage of compression files, upload files, and temporary report files
- D. 3.6% of the system storage is already being used.
Answer: C
NEW QUESTION 41
If a hard disk fails on a FortiAnalyzer that supports software RAID, what should you do to bring the FortiAnalyzer back to functioning normally, without losing data?
- A. Hot swap the disk
- B. Shut down FortiAnalyzer and replace the disk
- C. Replace the disk and rebuild the RAID manually
- D. Take no action if the RAID level supports a failed disk
Answer: C
NEW QUESTION 42
Which two statements about log forwarding are true? (Choose two.)
- A. You can use aggregation mode only with another FortiAnalyzer.
- B. Logs are forwarded in real-time only.
- C. Forwarded logs cannot be filtered to match specific criteria.
- D. The client retains a local copy of the logs after forwarding.
Answer: B,D
Explanation:
Explanation/Reference: www.fortinetguru.com/2020/07/log-forwarding-fortianalyzer-fortios-6-2-3/
NEW QUESTION 43
Which two settings must you configure on FortiAnalyzer to allow non-local administrators to authenticate to FortiAnalyzer with any user account in a single LDAP group? (Choose two.)
- A. A remote LDAP server
- B. A trusted host profile that restricts access to the LDAP group
- C. An administrator group
- D. A local wildcard administrator account
Answer: A,D
Explanation:
Explanation/Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD38567
NEW QUESTION 44
You are using RAID with a FortiAnalyzer that supports software RAID, and one of the hard disks on FortiAnalyzer has failed.
What is the recommended method to replace the disk?
- A. Clear all RAID alarms and replace the disk while FortiAnalyzer is still running
- B. Perform a hot swap
- C. Shut down FortiAnalyzer and then replace the disk
- D. Downgrade your RAID level, replace the disk, and then upgrade your RAID level
Answer: B
NEW QUESTION 45
FortiAnalyzer uses the Optimized Fabric Transfer Protocol (OFTP) over SSL for which purpose?
- A. To send an identical set of logs to a second logging server
- B. To encrypt log communication between devices
- C. To prevent log modification during backup
- D. To upload logs to an SFTP server
Answer: A
Explanation:
Explanation/Reference: https://docs.fortinet.com/document/fortigate/6.4.0/ports-and-protocols/109281/oftp-optimized- fabric-transfer-protocol#:~:text=The%20Optimized%20Fabric%20Transfer%20Protocol,and%2For%
20FortiManager)%20unit.
NEW QUESTION 46
What is the purpose of a predefined template on the FortiAnalyzer?
- A. It specifies report settings which contains time period, device selection, and schedule
- B. It contains predefined data to generate mock reports
- C. It specifies the report layout which contains predefined texts, charts, and macros
- D. It can be edited and modified as required
Answer: C
NEW QUESTION 47
What statements are true regarding FortiAnalyzer 's treatment of high availability (HA) dusters? (Choose two)
- A. FortiAnalyzer receives logs from d devices in a duster.
- B. FortiAnalyzer only needs to know (he serial number of the primary device in the cluster-it automaticaly discovers the other devices.
- C. FortiAnalyzer receives bgs only from the primary device in the cluster.
- D. FortiAnalyzer distinguishes different devices by their serial number.
Answer: A,D
NEW QUESTION 48
Which two methods can you use to send event notifications when an event occurs that matches a configured event handler? (Choose two.)
- A. IM
- B. SNMP
- C. Email
- D. SMS
Answer: B,C
NEW QUESTION 49
You need to upgrade your FortiAnalyzer firmware.
What happens to the logs being sent to FortiAnalyzer from FortiGate during the time FortiAnalyzer is temporarily unavailable?
- A. FortiAnalyzer uses log fetching to retrieve the logs when back online
- B. FortiGate uses the miglogd process to cache the logs
- C. Logs are dropped
- D. The logfiled process stores logs in offline mode
Answer: B
NEW QUESTION 50
How are logs forwarded when FortiAnalyzer is using aggregation mode?
- A. Logs and content files are stored and uploaded at a scheduled time.
- B. Logs are forwarded as they are received.
- C. Logs and content files are forwarded as they are received.
- D. Logs are forwarded as they are received and content files are uploaded at a scheduled time.
Answer: A
NEW QUESTION 51
Refer to the exhibit.
What does the data point at 14:35 tell you?
- A. The fortilogd daemon is ahead in indexing by one log.
- B. FortiAnalyzer has temporarily stopped receiving logs so older logs can be indexed.
- C. FortiAnalyzer is indexing logs faster than logs are being received.
- D. FortiAnalyzer is dropping logs
Answer: C
NEW QUESTION 52
What remote authentication servers can you configure to validate your FortiAnalyzer administrator logons?
(Choose three)
- A. TACACS+
- B. Local
- C. PKI
- D. LDAP
- E. RADIUS
Answer: A,D,E
NEW QUESTION 53
What FortiView tool can you use to automatically build a dataset and chart based on a filtered search result?
- A. Dataset Library
- B. Chart Builder
- C. Custom View
- D. Export to Report Chart
Answer: B
NEW QUESTION 54
You have recently grouped multiple FortiGate devices into a single ADOM. System Settings > Storage Info shows the quota used.
What does the disk quota refer to?
- A. The maximum disk utilization for the ADOM type
- B. The maximum disk utilization for each device in the ADOM
- C. The maximum disk utilization for the FortiAnalyzer model
- D. The maximum disk utilization for all devices in the ADOM
Answer: C
NEW QUESTION 55
What is the purpose of the following CLI command?
- A. To encrypt log communications
- B. To add a log file checksum
- C. To add a unique tag to each log to prove that it came from this FortiAnalyzer
- D. To add the MD's hash value and authentication code
Answer: B
NEW QUESTION 56
What are two of the key features of FortiAnalyzer? (Choose two.)
- A. Reports
- B. Cloud-based management
- C. Centralized log repository
- D. Virtual domains (VDOMs)
Answer: A,C
NEW QUESTION 57
Which two of the following must you configure on FortiAnalyzer to email a FortiAnalyzer report externally?
(Choose two.)
- A. Mail server
- B. Report scheduling
- C. Output profile
- D. SFTP server
Answer: C,D
Explanation:
Explanation/Reference: https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/6d9f8fb5-6cf4-11e9-
81a4-00505692583a/FortiAnalyzer-6.0.5-Administration-Guide.pdf (119)
NEW QUESTION 58
On the RAID management page, the disk status is listed as
What does the status Initializing indicate about what the FortiAnalyzer is currently doing?
- A. FortiAnalyzer is functioning normally
- B. FortiAnalyzer is writing to all of its hard drives to make the array fault tolerant
- C. FortiAnalyzer is ensuring that the parity data of a redundant drive is valid
- D. FortiAnalyzer is writing data to a newly added hard drive to restore it to an optimal state
Answer: B
NEW QUESTION 59
View the exhibit.
What does the data point at 14:35 tell you?
- A. The sqlplugind daemon is ahead in indexing by one log.
- B. FortiAnalyzer is dropping logs.
- C. FortiAnalyzer is indexing logs faster than logs are being received.
- D. FortiAnalyzer has temporarily stopped receiving logs so older logs' can be indexed.
Answer: A
Explanation:
Explanation
Logs are received then they are indexed, no logging server in the world can index logs faster than they are received. When FAZ receives raw logs, they are inserted (indexed) by the SQL database and the sqlplugind daemon, this graph shows that FAZ received 3 logs and sqlplugind indexed 4.
NEW QUESTION 60
What is the main purpose of using an NTP server on FortiAnalyzer and all of its registered devices?
- A. Log correlation
- B. Host name resolution
- C. Real-time forwarding
- D. Log collection
Answer: C
NEW QUESTION 61
......
Accurate & Verified Answers As Seen in the Real Exam here: https://www.exam4pdf.com/NSE5_FAZ-6.2-dumps-torrent.html
