2023 Updated Verified 300-610 dumps Q&As - Pass Guarantee or Full Refund
300-610 PDF Questions and Testing Engine With 206 Questions
NEW QUESTION # 117
A network engineer designs a Cisco Nexus data center network for a client-server farm using a pair of Nexus 9000 Series Switches in a vPC setup. Each server connects with two interfaces to both Nexus switches. The Nexus switches must always initiate the negotiation with the server.
Which feature should be used in this design to ensure traffic is forwarded from the server to the data center network?
- A. LACP mode auto
- B. PAgP mode desirable
- C. PAgP mode auto
- D. LACP mode active
Answer: D
NEW QUESTION # 118
A set of virtual machines must be live migrated from a data center to a disaster recovery site. The data center and disaster recovery sites are connected through an Inter-Pod Network topology. The gateway address of the virtual machine is the same across the data center and disaster recovery. Which Cisco Nexus feature supports this requirement?
- A. VXLAN EVPN
- B. FHRR
- C. VPLS
- D. FabricPath
Answer: A
NEW QUESTION # 119
Which two vSphere features must be included in the design of a Cisco HyperFlex systems stretched cluster?
(Choose two.)
- A. FT
- B. HA
- C. VSS
- D. VDP
- E. DRS
Answer: B,E
NEW QUESTION # 120
Refer to the exhibit.
What must be the default gateway of the servers in EPG Web?
- A. subnet address of BD1
- B. NAT appliance
- C. subnet address of BD2
- D. subnet address of L3Out
Answer: A
NEW QUESTION # 121
Refer to the exhibit.
The FCoE packets fail to be forwarded through the switch. What is the minimum MTU QoS requirement for the FCoE to work?
- A. 2158 bytes
- B. 2000 bytes
- C. 2240 bytes
- D. 9000 bytes
Answer: B
NEW QUESTION # 122
A network engineer is using a Cisco UCS environment connected to a Fibre Channel storage array. The Cisco UCS environment must be connected to an existing SAN network, and several Cisco MDS 9000 Series Switches must be added to increase storage density. The solution must not exhaust the SAN network from the list of available domain IDs after connecting Also, most of the SAN traffic must be mapped from the Cisco UCS blades to a specific group of the fabric interconnect ports Which two features must be deployed to meet these requirements? (Choose two.)
- A. end host mode
- B. priority flow control
- C. dynamic port pinning
- D. N-Port lD virtualization
- E. static PIN grouping
Answer: A,D
NEW QUESTION # 123
An engineer is designing a Cisco Nexus 7000 Series disaster recovery site using the data center interconnect solution to provide gateway redundancy and needs to ensure that devices use gateways in their own data centers.
Which design approach should be used to accomplish this goal?
- A. vPC localized to its own data center
- B. FHRP localized to its own data center
- C. STP localized to its own data center
- D. CFS localized to its own data center
Answer: B
NEW QUESTION # 124
An engineer must connect a Cisco UCS B-Series based system to an existing large storage area network fabric. The deployment must support hardware-based load balancing, prevent Fibre Channel domain ID exhaustion, and enable all blade servers to be in the same VSAN. Which set of actions meets the requirements?
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: C
NEW QUESTION # 125
Drag and drop the SAN components from the left onto the correct design considerations on the right.
Answer:
Explanation:
NEW QUESTION # 126
Drag and drop the technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 127
A network consultant must design a high availability interconnection of a clustered Cisco UCS Fabric Interconnect toward two upstream Layer 2 switches.
The Ethernet interconnection must use all redundant links and have no impact on the STP domain size.
Which connectivity solution must be used?
- A. Cisco UCS Fabric Interconnect in end host mode with a single uplink toward each upstream switch to eliminate any change to the STP domain size
- B. Cisco UCS Fabric Interconnect in end host mode with dual uplinks distributed evenly to the upstream switches
- C. Cisco UCS Fabric Interconnect in switch mode with dual uplinks distributed evenly to the upstream switches
- D. Cisco UCS Fabric Interconnect in switch mode with a single uplink toward each upstream switch to eliminate any change to the STP domain size
Answer: B
NEW QUESTION # 128
A network architect must design a large-scale Cisco SAN topology. The customer has a limited budget, so a design that provides use of resources is required. To support this requirement, the architect to share array ports, ISL, and line card bandwidth. The customer has also presented these additional considerations:
The customers plans to expand the network by 10% over the next two years.
The customer's policy requires physically separated infrastructure to support high availability.
Which solution should be used to meet these requirements?
- A. Collapsed-core
- B. Mesh
- C. Core-edge
- D. Edge-core-edge
Answer: C
Explanation:
Please review this question.
NEW QUESTION # 129
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
Explanation:
NEW QUESTION # 130
Drag and drop the configurations from the left onto the correct policies on the right.
Answer:
Explanation:
NEW QUESTION # 131
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
Answer:
Explanation:
NEW QUESTION # 132
Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?
- A. cross-connections with pinning
- B. VSS that has unified uplinks
- C. Ethernet and unified ports on the same port channel
- D. vPC that has unified uplinks
Answer: D
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-manager/116188- configure-fcoe-00.html#anc11
NEW QUESTION # 133
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
Answer:
Explanation:
NEW QUESTION # 134
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
Answer:
Explanation:
NEW QUESTION # 135
An engineer must design a Cisco HyperFlex solution to support a virtualized environment in a single data center location. The design must consider these customer requirements:
a large-scale cluster with eight or more nodes
distributed high-performance file system for virtualized servers
high fault tolerance to multiple node failures
Which action meets these objectives?
- A. Enable logical availability zones.
- B. Implement a replication factor of four.
- C. Configure data destaging and deduplication
- D. Create multiple datastores for storage of VM.
Answer: C
NEW QUESTION # 136
Which approach splits a pair of clustered fabric interconnects into two standalone devices?
- A. Erase the configuration of both fabric interconnects.
- B. Run the connect local-management command on each fabric interconnect.
- C. Unplug the Layer 1 and Layer 2 interfaces between the devices.
- D. Run the disable fips-mode command on each fabric interconnect.
Answer: C
Explanation:
Section: Compute Design
NEW QUESTION # 137
Drag the appropriate from the left onto the current UDLD modes of operation on the right.
Answer:
Explanation:
NEW QUESTION # 138
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION # 139
......
Exam Engine for 300-610 Exam Free Demo & 365 Day Updates: https://www.exam4pdf.com/300-610-dumps-torrent.html
Test Engine to Practice Test for 300-610 Valid and Updated Dumps: https://drive.google.com/open?id=1tb_-lxpGiyBemBfFtdAHsd8pjLyn1s7U
